Lot B15, Automation and control, for Balance of Plant for KVV8 CHP in Värtan

Fortum Värme samägt med Stockholms stad

OBS! This ad regards prequalification of suppliers.
The overall CMS automation shall control the entire plane for one single combustion line with fuel handling and storage, boiler - flue gas condensation, process ventilation - turbine and all needed process utility by means B o P.
Project KVV8 Lot B15 - Delivery of the CMS automation system for Balance of Plant to project KVV8
The control of the process shall be integrated in a standardized way, to have a uniform HMI operation structure for the entire plant.
The CMS delivery shall contain all the necessary equipment together with the belonging programming and operator stations, as well as the installation of all belonging CMS component.
Interface limits for the CMS are the terminals field equipment (instrumentations, actuators junction boxes etc.), and the intelligent MCC units and VSD drives in low voltage switchgears.
Quantity main deliverables:
Controllers (redundancy) 1 groups.
Controllers safety (redundancy) 1 groups.
Operator stations 1 groups.
Servers to fit the project. -
Function groups 5.
PID controller 25.
Intelligent Motor controls 10.
VSD drives 15
Electrical actuators 65
Other consumers 15
Instruments 100
RIO panels 7.
Hardware I/O signals 100.
Profibu-DP I/O siganls 1500
Installation of the CMS system incl. internal cabling.

Sista ansökningsdag

Tidsfristen för mottagande av anbud var 2013-07-15. Upphandlingen offentliggjordes den 2013-06-28.

Vem? Vad? Var?
Upphandlingshistorik
Datum Dokument
2013-06-28 Meddelande om upphandling
Meddelande om upphandling (2013-06-28)
Objekt
Upphandlingens omfattning
Titel: Automationssystem
Kvantitet eller omfattning:
- Design and Engineering- Procurement of hardware, connecting equipment, cabling etc.- Field equipment, instrumentation and assembly- Construction, Assembly and Supervision,- Testing, Commissioning and Training,- Documentation,- Health, Safety and Environment (HSE) - Swedish (HSE),- Quality assurance,- FAT, SAT and SIT presentation together with client, Simulator will be used for FAT- Take part in coordination meetings- Other task besides the above listed.
Visa mer
Meddelandeinformation
Originalspråk: engelska 🗣️
Dokumenttyp: Meddelande om upphandling
Kontraktets art: Byggentreprenader
Reglering: Europeiska unionen – inom ramen för avtalet om offentlig upphandling
Gemensam upphandlingsterminologi (CPV)
Kod: Automationssystem 📦

Förfarande
Förfarandetyp: Förhandlat förfarande
Anbudstyp: Anbud på alla delar
Kriterier för tilldelning
Det ekonomiskt mest fördelaktiga

Upphandlande myndighet
Identitet
Land: Sverige 🇸🇪
Upphandlande myndighet (typ): Allmännyttigt företag
Upphandlande myndighet (namn): Fortum Värme samägt med Stockholms stad
Postnummer: 115 77
Postort: Stockholm
Kontakt
Webbadress: http://www.fortum.se 🌏
E-post: lars.korsell@fortum.com 📧

Referens
Datum
Avsändningsdatum: 2013-06-28 📅
Sista anbudsdag: 2013-07-15 📅
Publiceringsdatum: 2013-07-03 📅
Identifierare
Meddelandenummer: 2013/S 127-218969
EUT-S-nummer: 127
Ytterligare information
Visma Commerce notice: http://www.opic.com/notice.asp?req=dibwfnhg

Objekt
Upphandlingens omfattning
Kort beskrivning:
OBS! This ad regards prequalification of suppliers.
The overall CMS automation shall control the entire plane for one single combustion line with fuel handling and storage, boiler - flue gas condensation, process ventilation - turbine and all needed process utility by means B o P.
Project KVV8 Lot B15 - Delivery of the CMS automation system for Balance of Plant to project KVV8
The control of the process shall be integrated in a standardized way, to have a uniform HMI operation structure for the entire plant.
The CMS delivery shall contain all the necessary equipment together with the belonging programming and operator stations, as well as the installation of all belonging CMS component.
Interface limits for the CMS are the terminals field equipment (instrumentations, actuators junction boxes etc.), and the intelligent MCC units and VSD drives in low voltage switchgears.
Quantity main deliverables:
Controllers (redundancy) 1 groups.
Controllers safety (redundancy) 1 groups.
Operator stations 1 groups.
Servers to fit the project. -
Function groups 5.
PID controller 25.
Intelligent Motor controls 10.
VSD drives 15
Electrical actuators 65
Other consumers 15
Instruments 100
RIO panels 7.
Hardware I/O signals 100.
Profibu-DP I/O siganls 1500
Installation of the CMS system incl. internal cabling.
Kvantitet eller omfattning:
- Design and Engineering
- Procurement of hardware, connecting equipment, cabling etc.
- Field equipment, instrumentation and assembly
- Construction, Assembly and Supervision,
- Testing, Commissioning and Training,
- Documentation,
- Health, Safety and Environment (HSE) - Swedish (HSE),
- Quality assurance,
- FAT, SAT and SIT presentation together with client, Simulator will be used for FAT
- Take part in coordination meetings
- Other task besides the above listed.
Beskrivning av alternativen: Re-cooling system for district heating system
Plats för genomförandet
Huvudort eller plats för utförandet: Stockholm

Juridisk, ekonomisk, finansiell och teknisk information
Villkor för deltagande
Behörighet att utöva yrkesverksamheten:
1: The supplier shall fulfill the following requirements according to the act of public procurement, SFS 2007:1092 chapter 10 §3:
A, is not bankrupt or being wound up, his affairs are not being administered by the court, he has not entered into an arrangement with his creditors, he has not suspended payments, or he is not subject to an injunction against carrying on business,
B, is not the subject of proceedings for a declaration of bankruptcy, for an order for compulsory winding up or administration by court or for an arrangement with creditors or similar proceedings,
C, has not been convicted of an offence concerning his professional conduct
D, has not been guilty of grave professional misconduct and the purchasing part can show this,
E, has fulfilled obligations relating to the payment of social insurance fees or taxes in the country in which he is established or the country in which the procurement takes place, or F, has not in some essential way deliberately not given requested information or deliberately given the wrong information that is requested according to this law.
Visa mer
2. The company should have documented good economy and the two latest annual reports should be submitted. Registration certificate and a certificate from tax authorities showing that all tax obligations are fulfilled should also be submitted.
Ekonomisk och finansiell ställning:
The following information shall be attached to the application to participate:
1.Company registration certificate or similar
2.Annual financial report for the last 2 years.
3.Certificate from tax authorities showing that all tax obligations are fulfilled.
4. Answer Fortums Supplier Questionnaire
Teknisk och yrkesmässig förmåga:
The technical capacity should be proven and valid references not older than 5 years should be included.
Fortum will only allow tenderers to invoke references of sub-contractors, partner etc. if the tenderers could proof/show that they could dispose over such references.
Kontraktets fullgörande
Personalens namn och yrkeskvalifikationer ✅

Förfarande
Språk
Språk: engelska 🗣️
svenska 🗣️

Upphandlande myndighet
Kontakt
Kontaktpunkt: Lars Korsell
Namn: Alsa Kraft Värme Konsult AB
Kontaktpunkt: Pär Wallin
Telefon: +46 705625480 📞
E-post: par.wallin@alsa.se 📧

Referens
Datum
Startdatum: 2013-10-01 📅
Slutdatum: 2016-02-29 📅
Källa: OJS 2013/S 127-218969 (2013-06-28)
Nya upphandlingar inom relaterade kategorier 🆕
Relaterade sökningar 🔍
Region:
Sverige Östra Sverige Stockholm Stockholms län
Produkter/tjänster:
Programvara och informationssystem Diverse programvara och datorsystem Programvara för kontorsautomation Automationssystem Installation (utom programvara) Installation av datorer och kontorsutrustning IT-tjänster: konsultverksamhet,...