On behalf of the Purchaser Kola Nuclear Power Plant (KNPP), the Swedish Radiation Safety Authority (SSM) has the pleasure to invite you to submit a tender for the development of method and delivery of equipment for inspection of dissimilar welds at Kola Nuclear Power Plant, Russian Federation. As part of an international project with Russia, this tender is procured according to SSM:s procurement policy document (PPD, appendix 7). Please note: The enquiry documents cannot be requested from the contracting authority. In order to gain access to the enquiry documents for this tender, click on "notice of interest" in Mercell's database. Then fill in your contact information and you will receive a password. The password will enable you to conveniently access the contract and bid directly on the web. For complete documentation, click on "I want to tender for the contract". If you are in another advertising database, please follow the link: http://com.mercell.com/permalink/46367567.aspx If you have any questions, please call the support phone number: +46 313606029 See also the attached enclosure. Best regards Gregor Szmaglinski The purchaser is using Mercell Sourcing Services for this tender. To notify your interest and get access to any documents, you must copy and paste the link below into the address-part on your browser. http://permalink.mercell.com/46367567.aspx. Then choose the relevant tender.
Sista ansökningsdag
Tidsfristen för mottagande av anbud var 2014-09-30.
Upphandlingen offentliggjordes den 2014-08-22.
Meddelande om upphandling (2014-08-22) Objekt Upphandlingens omfattning
Titel: Delar till kärnreaktorer
Meddelandeinformation
Originalspråk: engelska 🗣️
Dokumenttyp: Meddelande om upphandling
Kontraktets art: Varor
Reglering: Europeiska unionen
Gemensam upphandlingsterminologi (CPV)
Kod: Delar till kärnreaktorer📦
Förfarande
Förfarandetyp: Öppet förfarande
Anbudstyp: Anbud på alla delar
Kriterier för tilldelning
Det ekonomiskt mest fördelaktiga
Upphandlande myndighet Identitet
Land: Sverige 🇸🇪
Upphandlande myndighet (typ): Statligt verk
Upphandlande myndighet (namn): Strålsäkerhetsmyndigheten
Postadress: Solna Strandväg 96
Postnummer: 17116
Postort: Stockholm
Kontakt
E-post: gregor.szmaglinski@ssm.se📧
Telefon: +46 87994435📞
Referens Datum
Avsändningsdatum: 2014-08-22 📅
Sista anbudsdag: 2014-09-30 📅
Publiceringsdatum: 2014-08-26 📅
Identifierare
Meddelandenummer: 2014/S 162-290015
EUT-S-nummer: 162
Objekt Upphandlingens omfattning
Kort beskrivning:
On behalf of the Purchaser Kola Nuclear Power Plant (KNPP), the Swedish Radiation Safety Authority (SSM) has the pleasure to invite you to submit a tender for the development of method and delivery of equipment for inspection of dissimilar welds at Kola Nuclear Power Plant, Russian Federation.
On behalf of the Purchaser Kola Nuclear Power Plant (KNPP), the Swedish Radiation Safety Authority (SSM) has the pleasure to invite you to submit a tender for the development of method and delivery of equipment for inspection of dissimilar welds at Kola Nuclear Power Plant, Russian Federation.
As part of an international project with Russia, this tender is procured according to SSM:s procurement policy document (PPD, appendix 7).
Please note: The enquiry documents cannot be requested from the contracting authority. In order to gain access to the enquiry documents for this tender, click on "notice of interest" in Mercell's database. Then fill in your contact information and you will receive a password. The password will enable you to conveniently access the contract and bid directly on the web. For complete documentation, click on "I want to tender for the contract".
Please note: The enquiry documents cannot be requested from the contracting authority. In order to gain access to the enquiry documents for this tender, click on "notice of interest" in Mercell's database. Then fill in your contact information and you will receive a password. The password will enable you to conveniently access the contract and bid directly on the web. For complete documentation, click on "I want to tender for the contract".
If you are in another advertising database, please follow the link:
If you have any questions, please call the support phone number: +46 313606029
See also the attached enclosure.
Best regards
Gregor Szmaglinski
The purchaser is using Mercell Sourcing Services for this tender. To notify your interest and get access to any documents, you must copy and paste the link below into the address-part on your browser. http://permalink.mercell.com/46367567.aspx. Then choose the relevant tender.
The purchaser is using Mercell Sourcing Services for this tender. To notify your interest and get access to any documents, you must copy and paste the link below into the address-part on your browser. http://permalink.mercell.com/46367567.aspx. Then choose the relevant tender.
Referensnummer: SSM2014-2667
Plats för genomförandet
Huvudort eller plats för utförandet: Stockholm.
Juridisk, ekonomisk, finansiell och teknisk information Villkor för deltagande
Behörighet att utöva yrkesverksamheten:
1. Tenderers will be excluded should the Swedish Radiation Safety Authority become aware of the presence of a circumstance as described in Chapter 10, Article 1 of the Public Procurement Act (2007:1091; ‘LOU'). The tenderer must confirm in writing that none of the conditions stated in Chapter 10, Article 1 have arisen (see the Swedish Public Procurement Act).
1. Tenderers will be excluded should the Swedish Radiation Safety Authority become aware of the presence of a circumstance as described in Chapter 10, Article 1 of the Public Procurement Act (2007:1091; ‘LOU'). The tenderer must confirm in writing that none of the conditions stated in Chapter 10, Article 1 have arisen (see the Swedish Public Procurement Act).
2. Should any of the circumstances as described in Chapter 10, Article 2 of LOU be present, a tenderer may be excluded from the procurement process. This also applies to any sub-contractors. In order to monitor compliance, the Swedish Radiation Safety Authority reserves the right to, through the Swedish Tax Agency or UC, verify that tenderers and subcontractors have performed their obligations in terms of taxes and social security contributions. This is why tenderers shall provide the tenderer's and subcontractor's corporate identity number. Foreign tenderers (i.e. not based in Sweden) are requested to attach corresponding details to the tender to demonstrate that the tenderer and any subcontractors have performed their obligations in terms of taxes and social security contributions in the tenderer's and subcontractor's respective home country.
2. Should any of the circumstances as described in Chapter 10, Article 2 of LOU be present, a tenderer may be excluded from the procurement process. This also applies to any sub-contractors. In order to monitor compliance, the Swedish Radiation Safety Authority reserves the right to, through the Swedish Tax Agency or UC, verify that tenderers and subcontractors have performed their obligations in terms of taxes and social security contributions. This is why tenderers shall provide the tenderer's and subcontractor's corporate identity number. Foreign tenderers (i.e. not based in Sweden) are requested to attach corresponding details to the tender to demonstrate that the tenderer and any subcontractors have performed their obligations in terms of taxes and social security contributions in the tenderer's and subcontractor's respective home country.
3. Requirements relating to legal status. With the aim of verifying that tenderers are entered in trade and business registers (in the event of this obligation), the Swedish Radiation Safety Authority will check to ensure that there are no related impediments. In terms of this requirement, no documents need be attached: The Swedish Radiation Safety Authority will carry out checks through the 'Bolagsverket' (Swedish Companies Registration Office) or UC AB, a credit information agency. Foreign tenderers (i.e. not based in Sweden) must attach corresponding details with the tender.
3. Requirements relating to legal status. With the aim of verifying that tenderers are entered in trade and business registers (in the event of this obligation), the Swedish Radiation Safety Authority will check to ensure that there are no related impediments. In terms of this requirement, no documents need be attached: The Swedish Radiation Safety Authority will carry out checks through the 'Bolagsverket' (Swedish Companies Registration Office) or UC AB, a credit information agency. Foreign tenderers (i.e. not based in Sweden) must attach corresponding details with the tender.
Teknisk och yrkesmässig förmåga:
4. Quality assurance. The tenderer must actively perform quality assurance work. Please note that certification is not a requirement. Has this requirement been fulfilled? Describe how the tenderer performs quality assurance work.
5. Environmental management. Purposeful work relating to environmental issues is an important factor for the Swedish Radiation Safety Authority. Please note: Certification is not a requirement. Has this requirement been fulfilled? Describe how the tenderer performs environmental management work.
5. Environmental management. Purposeful work relating to environmental issues is an important factor for the Swedish Radiation Safety Authority. Please note: Certification is not a requirement. Has this requirement been fulfilled? Describe how the tenderer performs environmental management work.
6. Capacity. The tenderer shall exercise control over (by means of own employees or through other capacity) both the range of skills and the supply capacity stated in the tender (throughout the contractual period). Consultants are to either be employees or cooperating partners (sub-contractors), though the tenderer is always fully responsible for the work performed by sub-contractors. The tenderer must state whether sub-contractors will participate in the stipulated supply capacity. In the event that tenderers wish to utilise the capacity of another party (sub-contractor), the tenderer must clearly state that the tenderer actually exercise control over the relevant resources (for example, through a certificate from the sub-contractor). Attach a cooperation agreement or certificate from the subcontractor showing that you exercise control over the proposed resources.
6. Capacity. The tenderer shall exercise control over (by means of own employees or through other capacity) both the range of skills and the supply capacity stated in the tender (throughout the contractual period). Consultants are to either be employees or cooperating partners (sub-contractors), though the tenderer is always fully responsible for the work performed by sub-contractors. The tenderer must state whether sub-contractors will participate in the stipulated supply capacity. In the event that tenderers wish to utilise the capacity of another party (sub-contractor), the tenderer must clearly state that the tenderer actually exercise control over the relevant resources (for example, through a certificate from the sub-contractor). Attach a cooperation agreement or certificate from the subcontractor showing that you exercise control over the proposed resources.
Förfarande
Anbudens giltighetstid: 2014-12-31 📅
Datum för öppnande av anbud: 2014-10-01 📅
Språk
Språk: engelska 🗣️